A DETECT PARTIAL DISCHARGE IN ISOLATOR USING A FLUKE ii910 SONIC INDUSTRIAL IMAGER IN PTR 03 FEEDER (SARIBU DOLOK)
Abstract
Partial discharge is a very serious problem that should be monitored quickly. The cause of Partial discharge failure is due to the presence of voids filled with gas/air in the insulation material. Partial discharge can also be regarded as losses because it can reduce the quality of the insulation material. This study aims to detect partial discharge using the Fluke ii910 Sonic Industrial Imager. Tests in this study using descriptive quantitative research methods. From the tests that have been carried out, it can be concluded that using the Fluke ii910 Sonic Industrial Imager can make it easier to find partial discharges on the insulator and minimize the impact of interference caused by partial discharges
Downloads
References
[2]. Fluke Corporation. (2019). The main causes and types of partial discharge. Accessed on January 01, 2022, from https://www.fluke.com/idid/pelajari/blog/detection of leaks/partial-discharge
[3]. Fluke Corporation. (2019). Fluke ii910 Precision Acoustic Imager. Retrieved January 01, 2022, from https://www.fluke.com/en/products/thermografi-forindustri/precision-acoustic-imager-ii910 Fluke Corporation. (2020).
[4]. Fluke ii910 Precision Acoustic Imager. Accessed on January 01, 2022, from https://forms.fluke.com
[5]. Institute of Electrical and Electronics Engineers 400.3-2006, Guide for Partial Discharge Testing of Shielded PowerCable Systems in a Field Environment, IEEE.
[6]. Putri, M., & Aryza, S. (2018). Design of security tools using sensor Light Dependent Resistor (LDR) through mobile phone. Int. J. Innov. Res. in Comp. and Comm. Eng, 4(10), 168-173.
[7]. P. Nugroho, “A Study of Partial Discharge Measurement of Electricity and Void Applications in LDPE,” Tek. ITB electrical engineering, 2000.
[8]. Swuarno, Diktat of Insulation Engineering Lectures. Electro and Informatics ITB, 2006.M.
[9]. State Electricity Company Standard 43- 54:199