An Evaluation Of The Electrical Protection Installation System At PT. BTP Class 1 Medan North Part

Solly Aryza; Iskandar Iskandar; Muhammad Bintang Ramadhan; Bernike Patresia Sitepu; Bernike Patresia Sitepu

Solly Aryza Universitas Pembangunan Panca Budi Medan, North Sumatera
Iskandar Iskandar Head Of Infrastructure At The Railway Engineering Center Medan, North Sumatera, Indonesia
Muhammad Bintang Ramadhan Universitas Pembangunan Panca Budi Medan, North Sumatera
Bernike Patresia Sitepu Universitas Pembangunan Panca Budi Medan, North Sumatera
Bernike Patresia Sitepu Universitas Pembangunan Panca Budi Medan, North Sumatera

Keywords: electrical installations, light intensity, lighting system determination

Abstract

The continuous advancement of technology over the years has led to the sophistication of various facilities, including lighting systems. Lighting is essential in every corporate setting, illuminating spaces to facilitate activities and enhance visibility. It plays a crucial role in activity planning to achieve specific goals. The quality of lighting in a room is determined by factors such as intensity and suitability for different types of tasks. Research has been conducted on space lighting intensity using the SNI Standard 16-7062-2004, along with calculations of the electrical energy consumption. Light intensity measurements are taken using a Lux Meter during field observations. Rooms are designed to meet standard health requirements for office and industrial environments, ensuring adequate Illumination Intensity (E) to support various activities. Tests are conducted to determine the appropriate lighting fixtures for each room, with the primary goal of ensuring that employees can work safely and comfortably in their work environment.

Downloads

Download data is not yet available.

References

[1] Aryza, S., Irwanto, M., Lubis, Z., Siahaan, APU, Rahim, R., & Furqan, M. (2018). A Novelty Design Of Minimization Of Electrical Losses In A Vector Controlled Induction Machine Drive. In IOP Conference Series: Materials Science and Engineering (Vol. 300, No. 1, p. 012067). IOP Publishing.
[2] Aryza S. ( 2022). Implementasi Artificial Neural Nethwork Dalam Pengaturan Kualitas Produk Biodiesel dari minyak jelantah. Senatika Vol 6 no 3 pp 173-184
[3] Aulia.B, O.Penangsang, and Ni Ketut., "Optimizing Bank Capacitor Placement to Improve Power Quality in PT Semen Indonesia Aceh's Electrical System Using the Genetic Algorithm Method", ITS Engineering Journal, Surabaya, 2016.
[4] Hamdani, H., Tharo, Z., & Anisah, S. (2019, May). Comparison of the Performance of Solar Power Plants Between Mountain Areas and Coastal Areas. In Uisu National Engineering Seminar (Semnastek) (Vol. 2, No. 1, pp. 190-195).
[5] H. Alam., Habibi, A. K., & Widya, H. (2022, July). Penggunaan Algoritma Vigenere Cipher Dan One Time Pad Untuk Keamanan Pesan Teks. In Prosiding Seminar Nasional Teknik UISU (SEMNASTEK) (Vol. 5, No. 1, pp. 160-166).
[6] Maulana.N, "Analytical Study of the Addition of Bank Capacitors to the Power Plant System of PT PJB UBJO&M PLTU Paiton 9 and Its Effect on Operation Patterns", ITS, Surabaya, 2017.
[7] M. Hakim “Analysis The Need for Capacitor Banks and Their Implementation to Improve Electrical Power Factors at Malang City Polytechnic", Malang City Polytechnic, Malang, 2014.
[8] Putri, M., Wibowo, P., Aryza, S., & Utama Siahaan, APRussiandi.(2018). An implementation of a filter design passive lc in reducing a current harmonics. International Journal of Civil Engineering and Technology, 9(7), 867-873.
[9] Rahmaniar, R. (2019). Flash-nr Model in Electrical Power System Analysis (Doctoral Dissertation, Padang State University).
[10] Tarigan, AD, & Pulungan, R. (2018). The Effect of Using Unbalanced Loads on the Lifespan of Electrical Equipment. RELE (Electrical and Energy Engineering): Journal of Electrical Engineering, 1(1), 10-15